User`s guide

Section 4: Setting Up - AS/400 AXIS 5470e/570/670e User’s Manual
58
Configuring the
AS/400 Host System
When configuring the AS/400 host system you can:
• create a PSF configuration
• create a printer device description
Creating a PSF
Configuration
The system uses default values but you can optionally create a PSF
configuration by following the instructions below:
1. Issue the command CRTPSFCFG.
2. Press F11 to display keywords.
3. Select a name for the PSF configuration and enter it at the
PSF
configuration (PSFCFG)
line. The name may comprise the
letters A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed.
4. Enter
QGPL at the Library line.
5. Enter
*YES at the IPDS pass through (IPDSPASTHR) line.
6. Enter
*NORDYF at the Activate release timer
(ACTRLSTMR
) line.
7. Enter
*NOMAX at the Release timer (RLSTMR) line.
8. Press the Enter key on your keyboard to create the PSF
configuration.
Many of the settings presented in the following panel example can be
left at their default settings. However, the settings that you must
change are highlighted in bold text and the settings that you must
enter exactly as shown in the example are highlighted in bold
underlined text.