User`s guide

Section 4: Setting Up - AS/400 AXIS 5470e/570/670e User’s Manual

Verifying the

communication link

1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first

four characters of the printer device name, on the AS/400

command line and press Enter. A list of printer devices will be

displayed. Make sure that a virtual printer device is active.

2. Direct a printout to this printer device to check the integrity of

the communication link.

3. Press the test button on the AXIS 5470e/570/670e once to print a

test page. Make sure that the TN5250E status is defined on the

test page as

Idle, Actv or LU-1.