User`s guide

Section 4: Setting Up - AS/400 AXIS 5470e/570/670e User’s Manual
52
Configuring the
AXIS
5470e/570/670e
To perform the instructions presented in this section, you should first
assign an IP address to your AXIS 5470e/570/670e using one of the
methods presented in Assigning an IP address, on page 32.
Note:
After you have completed the procedures in the AS/400 Host system
checklist above, follow the instructions below to configure the AXIS
5470e/570/670e for SNA printing in the AS/400 environment using a
Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the AXIS
5470e/570/670e in the location field and press the Enter key on
your keyboard. The internal Web pages of the AXIS
5470e/570/670e will appear.
Note:
3. Click the Configuration Wizard for IBM sessions button.
If your network does not support the TCP/IP protocol suite, you can still configure
the AXIS 5470e/570/670e using the AXIS NetPilot installation tool.
To protect the admin pages and the Configuration Wizard from unauthorized
use, enter a password (default Pass) in the Root Password field under
admin | General Settings.