User`s guide

AXIS 5470e/570/670e User’s Manual Section 4: Setting Up - AS/400
51
11. Page forward to the next screen by pressing Enter and verify that
the
Maximum Storage Allowed parameter is set to
*NOMAX. Press F3.
Example:
Use the command WRKCFGSTS *CTL xxxx* (where xxxx is the
first 4 characters of the AXIS 5470e/570/670e
5494 LU Name)and
press Enter to delete any previously created Controller and Device
descriptions specific to your AXIS 5470e/570/670e. Delete the Device
Descriptions (indented text) first and then the Controllers. Print a test
page if you are unsure of the AXIS 5470e/570/670e
5494 LU
Name
.
Example:
Display User Profile - Basic
User profile . . .............: QUSER
Initial program .............: *NONE
Library . . . .............:
Initial menu . . .............: MAIN
Library . . . .............: *LIBL
Limit capabilities............: *NO
Text...................: Work Station User
Display sign-on information .......: *SYSVAL
Limit device sessions . . ........: *SYSVAL
Keyboard buffering............: *SYSVAL
Maximum storage allowed . ........: *NOMAX
Storage used . .............: 832
Highest scheduling priority .......: 3
Job description .............: QDFTJOBD
Library . . . .............: QGPL
More...
Press Enter to continue.
F3=Exit
F12=Cancel
Work with Configuration Status S1032BB0
Position to . . . . . Starting characters
Type options, press Enter.
1=Vary on 2=Vary off 5=Work with job 8=Work with description
9=Display mode status 13=Work with APPN status...
Opt Description Status -------------Job--------------
FSIOP ACTIVE
ETHERNET ACTIVE
AXIS11 ACTIVE
AXIS11 ACTIVE
AXIS11 ACTIVE/TARGET SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190