User`s guide

Section 4: Setting Up - AS/400 AXIS 5470e/570/670e User’s Manual

4. Press Enter to display the SSAP list. Make sure that there is at

least one SSAP entry dedicated for SNA. For your future

reference, note the SSAP value for this entry.

Verify that the number of controllers displayed on this screen does

not exceed the value for maximum controllers (MAXCTL) from

above.

Example:

Note:

5. Press Enter to display the Autocreate controller

(AUTOCRTCTL) parameter. Ensure that the AUTOCRTCTL

parameter is set to *YES. Press F3 to return to the command line.

The SNA entry is normally set to SSAP 04.

Display Line Description S1032BB0

Linedescription.........: ETHERNET

Option..............: *SSAP

Categoryofline.........: *ELAN

----Source Service Access Points----- ----Source Service Access Points--

---

SSAP Maximum Frame Type

04 1496 *SNA

12 1496 *NONSNA

AA 1496 *NONSNA

C8 1496 *HPR

Bottom

Press Enter to continue.

F3=Exit F11=Display keywords F12=Cancel