User`s guide

Section 4: Setting Up - AS/400 AXIS 5470e/570/670e User’s Manual
46
The AS/400 Host
System Checklist
If you are using AS/400 Version 3 Release 1 or higher, the AS/400
host in 5494 CU mode is automatically configured. The instructions
in this section describe this automated configuration procedure.
If you are using a pre-version 3 release, you must perform the
configuration procedure manually. If this is the case, please refer to the
AXIS Network Print Server Technical Reference that is supplied on
the AXIS Product CD or the Technical Notes that feature on the Axis
Web site.
Note:
1. Type DSPNETA on the AS/400 command line and press Enter.
For future reference, note the values of the Local network
ID and Default local location parameters. Press F3.
Example:
The required parameter values are highlighted in bold.
AXIS 5470e/570: Type WRKLIND *ELAN and press Enter:
AXIS 670e: Type WRKLIND *TRLAN and press Enter to get a list
of all line descriptions on the system. Type 5 in front of the line
description and press Enter.
There is an AS/400 Parameter checklist in the AXIS 5470e/570/670e User’s Guide
where you can enter the values described in this section for future reference.
DSPNETA
Display Network Attributes
System:
S1032BB0
Currentsystemname ..............: S1032BB0
Pendingsystemname .............:
LocalnetworkID................:>APPN
Localcontrolpointname............: S1032BB0
Defaultlocallocation.............:>S1032BB0
Defaultmode..................: BLANK
APPNnodetype.................: *ENDNODE
Datacompression................: *NONE
Intermediatedatacompression .........: *NONE
Maximum number of intermediate sessions . . . . : 200
Routeadditionresistance ...........: 128
ServernetworkID/controlpointname......: *LCLNETID *ANY
More...
Press Enter to continue.
F3=Exit F12=Cancel