User`s guide

Section 3: Basic Installation AXIS 5470e/570/670e User’s Manual
42
Example - AXIS 670e Token Ring Print Servers:
Notes:
2. If necessary, update your host table and alias name databases, as
required by your system.
3. If it is not already running, start the BOOTP daemon. This is
typically performed using the
bootpd command.
4. Restart the AXIS 5470e/570/670e to download the IP address,
default router address and subnet mask.
The AXIS 5470e/570/670e can automatically download a customized
config file from a TFTP server. Just add the name of the config file
and the TFTP server’s IP address to your boot table. The config file is
downloaded immediately after the AXIS 5470e/570/670e receives its
IP address.
npsname:ht=tr:vm=rfc1048:\
:ha=000231480061:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1
• Enter the ht and vm fields exactly as shown in the example.
• The ha field is the Ethernet address/node address and the ip field is the IP
address of your AXIS 5470e/570/670e.
• The gw and sm fields correspond to the default router address and subnet
mask.