User`s guide

AXIS 5470e/570/670e User’s Manual Section 3: Basic Installation
37
Using ARP in
Windows and OS/2
Follow the instructions below to set the IP address using ARP:
AXIS 5470e/570
Ethernet Print Servers:
1. Start a DOS window.
2. Type the following commands:
Example
The host will return
Reply from 192.168.3.191 ... or a
similar message. This indicates that the address has been set and that
communication is established.
Notes:
arp -s <IP address> <Ethernet address>
ping <IP address>
arp -d <IP address>
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d 192.168.3.191
• The Ethernet address is equal to the serial number, which can be found on
the underside label of the AXIS 5470e/570.
• When using the Windows 95 implementation of ARP, change the first line to:
arp -s <IP address> <Ethernet address>
<w95host IP address>
, where <w95host IP
address>
is the IP address of your Windows 95 host.
• When you execute the ping command for the first time, you will experience
a significantly longer response time than is usual.
• By using the arp -d command, the static entry in the arp table is removed
from the host’s cache memory.