User`s guide

Section 3: Basic Installation AXIS 5470e/570/670e User’s Manual

• range of IP addresses

• subnet mask

• default router IP address

• WINS server IP address(es)

• lease duration

2. Activate the scope.

The AXIS 5470e/570/670e will automatically download the DHCP

parameters.

If you are using WINS, you must include at least one WINS server IP

address in the DHCP scope. Immediately after the IP address has been

received, the AXIS 5470e/570/670e registers its host name and IP

address on the WINS server.

The AXIS 5470e/570/670e can automatically download a customized

config file from a TFTP server. Just add the name of the config file

and the TFTP server’s IP address to your DHCP scope. The config

file is downloaded immediately after the AXIS 5470e/570/670e

receives its IP address.

Note:

DHCP and Auto-IP Auto-IP is a tool for setting the IP Address of the print server in the

absence of a DHCP server.

If you have a DHCP server running on your network, the AXIS

5470e/570/670e will receive an IP address immediately after you have

it connected to the network. In the absence of an DHCP server, your

AXIS 5470e/570/670e will automatically be assigned an IP address

through integrated Auto-IP. The Auto-IP function is enabled by

default and does not require any configuration by the user.

You do not have to restart the AXIS 5470e/570/670e to download the IP address.