User`s guide

AXIS 5470e/570/670e User’s Manual Appendix A: Test Button
301
Appendix A Test Button
The test button is located on the front right hand side of the AXIS
5470e/570/670e and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 5470e/570/670e cur-
rent settings.
• Resetting the AXIS 5470e/570/670e parameters to the factory
default settings.
The Test Page Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 5470e/570/670e. It is
recommended that you print a test page every time you have
connected the AXIS 5470e/570/670e to a printer.
Note:
The Parameter List Press the test button twice to print a parameter list showing the
current AXIS 5470e/570/670e settings. This list provides
comprehensive details of all the parameters and their current status.
Refer to Appendix A - The Parameter List, on page 285.
If you want to change any of the parameters, use one of the methods
that are described in Section 11 Management & Configuration, on
page 169.
AXIS 570/670e:
The test page is printed on LPT1 by default. If you want to print the test page on
LPT2 instead, you should set the Internal Printout Destination parameter to
LPT2.