User`s guide

Section 3: Basic Installation AXIS 5470e/570/670e User’s Manual
30
Installation Guide
After connecting the AXIS 5470e/570/670e to your network, you are
now ready to perform the basic setup procedures. The method of
installation that you choose should be dictated by your printing
requirements and the type of network into which you are integrating.
Installation Methods Select the appropriate installation method from the table below:
Available installation methods for the AXIS 5470e/570/670e
* Macintosh is supported by AXIS 5470e/570 only.
Environment
Network
Configuration
Action
AS/400
SNA See Section 4 Setting Up - AS/400, on page 43
TCP/IP
TN5250E
See Assigning an IP address, on page 32
Proceed with Section 4 Setting Up - AS/400, on page 43
PPR/PPD
IBM
Mainframe
SNA See Section 5 Setting Up - IBM Mainframe, on page 65
TCP/IP
TN3270E
See Assigning an IP address, on page 32
Proceed with Section 5 Setting Up - IBM Mainframe, on page 65
PPR/PPD
NetWare
NDPS See Setup using NDPS, on page 111
NetWare See Basic Setup with AXIS NetPilot, on page 114
Advanced
configuration
See Basic Setup with AXIS NetPilot, on page 114
Proceed with Basic Setup with AXIS NetPilot, on page 114
Windows
NetBIOS/NetBEUI See Section 7 Setting Up - Windows, on page 125
TCP/IP
See Assigning an IP address, on page 32
Proceed with Section 7 Setting Up - Windows, on page 125
OS/2 NetBIOS/NetBEUI See Section 8 Setting Up - OS/2, on page 151
Macintosh(*) AppleTalk See Section 9 Setting Up - Macintosh, on page 157
UNIX TCP/IP
See Assigning an IP address, on page 32
Proceed with Section 10 Setting Up - UNIX, on page 163