User`s guide

AXIS 5470e/570/670e User’s Manual Section 3: Basic Installation

You are now ready to install your server onto your network using one

of the methods detailed in the Installation Guide, on page 30.

Notes:

• To minimize signal noise, it is recommended that you use screened or foiled

Media Type 3 cabling for 16 Mbps networks and not

standard UTP cabling.

• The test page includes a list of the most important parameters, including the

network speed and the firmware version number.

• Each AXIS 670e Print Server is pre-configured with a unique node address

that is identical to the serial number. The node address can be changed using

AXIS NetPilot, or any standard Web browser. Please refer to Section 11

Management & Configuration, on page 169, for more information.

• The AXIS 670e uses high speed Centronics communication. For use with

older printers not supporting high speed, this function can be disabled by

using AXIS NetPilot, or any standard Web browser. Please refer to Section

11 Management & Configuration, on page 169, for more information.