User`s guide

Appendix H: Digital Copier Support AXIS 5470e/570/670e User’s Manual
284
• Center 2 i.e. two staples set in the center of the page. This option
is intended for documents printed in A3 format. The staples are
placed in the center of the page where the document is to be
folded. Please refer to the documentation of your digital copier for
more information on these features.
Copier Hole Punch The AXIS 5470e/670e supports hole punching with the following options:
• Off i.e. the hole punching option is not activated (default).
• Long-edge i.e. the left hand side of the document.
• Short-edge i.e. the top of the document.
Copier Paper Source Enter the desired input bin i.e. paper tray on your digital copier
Copier Copies Enter how many collated (sorted) copies you wish to print in the Copies
field.
Notes:
• The options are all available in the drop-down lists under Model, Duplex, Sta-
ple, Punch, Paper Source and Copies. However, you must refer to the docu-
mentation of your specific Digital Copier to check that all the options are
supported.
• If you experience problems with this functionality the Digital Copier printing
options may have been set inconsistently. Please check your configuration
settings and try again.