User`s guide

AXIS 5470e/570/670e User’s Manual Appendix H: Digital Copier Support
283
Appendix H Digital Copier Support
Note:
The logical printers support the printing options available on digital copiers
and multi-functional printers. It is recommended that you configure the
eight logical printers (PR1-PR8) to allow for eight different combinations of
the following options to suit your printing needs.
For more information on how to configure the logical printers, please refer to
Using Logical Printers to Customize your Printing on page 215.
The added functionality includes the following options:
Copier Model From the drop-down list of supported copiers, select the digital copier that
you have connected the AXIS 5470e/670e to.
Copier Duplex The AXIS 5470e/670e supports duplex printing i.e. printing on both sides of
the paper. The options in the drop-down list are:
• Off i.e. the duplex printing option is not activated (default).
• Simplex i.e. printing on one side only.
• Long-edge binding i.e. printing on both sides, long-edge first.
• Short-edge binding i.e. printing on both sides, short-edge first.
Copier Staple The AXIS 5470e/670e supports stapling with the following options:
• Off i.e. the stapling option is not activated (default).
• Top left slant i.e. one staple in a slanted position in the top left
corner of the document.
• Top left horizontal i.e. one staple placed horizontally in the top
left corner of the document.
• Top left vertical i.e. one staple placed vertically in the top left cor-
ner of the document.
• Top 2 i.e. two staples at the top of the document.
• Left 2 i.e. two staples on the left hand side of the document.
This functionality is supported by the AXIS 5470e Copier model and the AXIS
670e only.