User`s guide

AXIS 5470e/570/670e User’s Manual Appendix F: IPDS Overview
271
PostScript
output bin settings
These parameters are for mapping the IPDS bin numbers to the bin
numbers of the connected postscript printer.
IPDS PCL
Configuration
Click the IPDS PCL Driver Settings tab and enter the configuration
settings for the parameters as described below. When you are finished,
click OK at the bottom of the page to save your settings to the print
sever.
Language version Select the correct PCL language version depending on your connected
printer.
Symbol set Select the preferred symbol set from the drop-down list. The default
and recommended value is AUTOMATIC. The print server will
automatically select the appropriate symbol set.
PCL bin 1-5 Define the positioning by setting the parameters Horizontal Offset
and Vertical Offset to the desired values.
PCL Output Bin These parameters are for mapping the IPDS bin numbers to the bin
numbers of the connected PCL printer.
IPDS Fonts
This section describes how IPDS fonts are handled by the AXIS
5470e/570/670e. There are two different approaches to font handling:
• downloading fonts from the host.
• using fonts that are already resident in the printer.
Both methods are supported by the AXIS 5470e/570/670e.