User`s guide

AXIS 5470e/570/670e User’s Manual Appendix F: IPDS Overview
265
Appendix F IPDS Overview
This section describes:
•IPDS parameter settings
•IPDS fonts
IPDS Parameter Settings
Before printing IPDS data streams, the basic parameters should be set.
This is done from the AXIS 5470e/570/670e web pages under IBM
Emulators | Detailed view (IBM IPDS Emulator Settings) where you
can configure the common parameters of the IPDS emulator and IBM
Emulators | Detailed view (SCS/IPDS Emulator Configurations)
where you can configure the settings for each session.
IPDS System Languages
The AXIS 5470e/570/670e must be set up for the System Language of
your IBM system configuration in order to obtain the correct
characters in each specific language. This is done from the IBM
Emulators | Detailed view (SCS/IPDS Emulator Configurations)
page.
The default selection is US English (Code Page 37).
The following table describes the valid IPDS system languages:
Code page System language
*37 US English, Portuguese Alternate and Canadian
Bilingual
256 International set 1
259 Symbols set 7
260 Canadian French
273 Austrian/German
274 Belgian