User`s guide

Appendix B: SNA Gateways AXIS 5470e/570/670e User’s Manual
242
Pooling LUs may not be used for AXIS 5470e/570/670e.
AXIS 570/670e If the LAN media at the remote (Print Server) location differs from
that at the host location (e.g. Remote LAN = Ethernet and Host LAN
= Token Ring), the MAC address definitions must be modified, as
outlined below:
Print Server Modifications:
The AXIS 5470e/570/670e Host MAC address (H1_MAC_ADDR)
must be bit-order reversed for each byte,
e.g. if the host address is 08005AB77D49 the converted address will
be 10005AEDBE92
Host Modifications:
The required Host modifications are dependent upon the VTAM
definition for the Major Node where the Print Server definition is
placed.
• Case 1: VTAM Major Node definition is a Switched Major
Node.
The MAC address of the AXIS 5470e/570/670e must be bit-
order reversed in the PATH entry. An AXIS 570 with a
MAC/node address of 00408C1B06D4 will be defined using
the MAC/node address 000231D8602B as follows:
• Case 2: VTAM Major Node definition is a Local Major
Node.
When using a channel attached controller as gateway to the
host, the MAC address of the AXIS 5470e/570/670e is
configured in the gateway. The address must be reversed, as in
case 1 above.
Concentrator
Gateway, NetWare
This is an outline of the procedure for configuring to a Novell
NetWare for SAA v 2.0 Server. More information is provided in the
Support section of the Axis WWW Home Page.
PA5701 PATH DIALNO=0104000231D8602B,
GID=1, PID=1, GRPNM=gggggg