User`s guide

AXIS 5470e/570/670e User’s Manual Appendix A: SNA Parameter Overview
239
Auto-configuration and Mapping
The configuration created in the AS/400 and the mapping to the
AXIS 5470e/570/670e as a result of the auto-configuration process is
illustrated by the figure below.
Illustration of the configuration created in the AS/400 and the mapping to the
AXIS 5470e/570/670e as a result of the auto-configuration
Printer Device
Descriptions
Through auto-configuration, the APPC controller, APPC device,
RWS controller as well as printer device descriptions for the logical
printers, will be created automatically.
Controller and
Device Names
The names of the controllers and devices created in the AS/400 during
auto-configuration are by default the last 7 characters from the AXIS
5470e/570/670e serial number in reverse order, preceded by the letter
"A".
For example, serial number "00408C180102" will result in APPC-
controller "A201081C", APPC-device "A201081C" and RWS-
controller "A2010RMT".
APPC-controller
APPC-device
RWS-controller
Printer device #1
Printer device #2
Printer device #3
Logical Printer #1
Logical Printer #2
Logical Printer #3
Configuration in the
AXIS 5470e
Configuration in the
AS/400
Logical mappings
LU 6.2 conversation