User`s guide

AXIS 5470e/570/670e User’s Manual Appendix A: SNA Parameter Overview
233
Mainframe Specific
Parameters
AS/400 Specific
Parameters
Parameter Name Default Description
NODE_ID Node ID E07xxxxx, where
"xxxxx" are the last
five digits of the
Print Server’s MAC
address.
This is the SNA PU identification.
The first 3 digits is the IDBLK and the last five is
the IDNUM.
When defining a VTAM Switched Major Node,
this parameter should match the IDBLK and
IDNUM values specified in the PU definition.
Hexadecimal characters (0-9 and A-F) only are
allowed.
Parameter Name Default Emulation Description
NWORK_NAME Network
Name
APPN 5494 only This is the Print Server Network Name.
The value of this parameter is normally
the same as the "Host Network Name",
indicating that both the Print Server and
the AS/400 system are located on the
same APPN network.
The Network Name may comprise the
letters A-Z and/or numerals 0-9, but
must begin with a letter.
The letters used should all be in
UPPERCASE and a maximum of 8
characters are allowed.