User`s guide

Section 14: Upgrading the software AXIS 5470e/570/670e User’s Manual
228
Upgrading the firmware Software
You can upgrade the AXIS 5470e/570/670e Flash memory using one
of the following methods:
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
• AXIS NetPilot Upgrade Wizard (IPX/SPX)
Note:
Upgrading using
AXIS ThinWizard
AXIS ThinWizard is a tool that enables batch upgrading of several
print servers and should be used for upgrading the flash memory in
TCP/IP networks.
You must assign the AXIS 5470e/570/670e with an IP address, as
described in Assigning an IP address, on page 32, before you can use
this upgrading method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard
main menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard, on page 175, for more information
about AXIS ThinWizard.
Updating instructions are also supplied with the software update.