User`s guide
Section 13: Using Logical Printers AXIS 5470e/570/670e User’s Manual
222
9. Click OK.
The ISO 8859-2 printer data that is sent to logical printer PR1 is
converted to IBM PC Set 2 and is printed on LPT1. Similarly, the
DEC printer data that is sent to logical printer PR2 is converted to
IBM PC Set 2 and is printed on LPT1.
The ISO 8859-2 printer data that is sent to logical printer PR1 is
converted to IBM PC Set 2.
ASCII to Postscript
Conversion
The AXIS 5470e/570/670e logical printers can translate ASCII print
data into PostScript format. This makes it possible to print with a
PostScript printer from a host that does not support PostScript. The
conversion is selected by activating a filter that converts ASCII data
into Postscript. This filter can be activated individually for each logical
printer.
Activate your desired filter by setting the Printer Language Translation
(PRx_FILT) parameter.
Example: Follow the instructions below to convert ASCII print data to
PostScript for logical printer PR2:
1. Click admin and the Logical Printer Settings button.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Click OK.
Note:
If you select the parameter value AUTO_PS, the print data for every print job is
searched and if any ASCII data is found, it is translated into PostScript. This setting
is recommended if you are not sure if the print data is ASCII or PostScript.