User`s guide

Section 12: IPP (Internet Printing Protocol) AXIS 5470e/570/670e User’s Manual
208
5. Select the appropriate printer driver corresponding to the
destination printer.
6. Specify a name for the printer you wish to add to your printer list.
Click Finish. The destination printer will be added to your
printer list. You are now ready to print using IPP.
IPP printing in
Windows NT:
Before you print to an IPP printer you will need to know:
• the http:// address of the print server. The http:// address
contains the IP address or host name of the print server and the
printer port name.
• the brand of the printer in order to install the appropriate printer
driver.
• the printer port of the print server to which the printer is
connected.
1. First you need to select the IPP printer to which you want to send
your document. Select the destination printer from your Printer
Name list (In File | Print | Printer Setup).
The printer name will begin with a URL: http://...
If your destination printer does not exist in your Printer Name list,
you need to add it. Adding an IPP-printer to your printer list is
described in Adding an IPP printer to your printer list in
Windows NT, on page 208.
2. When you press Print, the print job is sent over the
Internet/WAN to the AXIS 5470e/570/670e print server, which
then forwards the print job to the destination printer.
3. The recipient of the print job can collect the print job at the
destination printer.
Adding an IPP printer
to your printer list in
Windows NT
In this example the print servers http: address is http://171.16.5.218,
the printer is connected to the AXIS 5470e/570/670e print server port
LPT1 and the printer is a HP LaserJet 5Si (and the port number is
631).
1. Install the Internet Printer Connection software from Hewlett