User`s guide

Section 11: Management & Configuration AXIS 5470e/570/670e User’s Manual
194
System Requirements
for SNMP
The following requirements must be fulfilled in order to make full use
of the AXIS 5470e/570/670e SNMP support:
• NMS software that allows you to install private enterprise MIBs
• A host, supporting FTP, on which to run the NMS software
Follow these steps to add the AXIS MIB to your NMS software:
1. Log in to the AXIS 5470e/570/670e using FTP.
2. Download the MIB file /snmp/axis.mib to the NMS host.
3. Install the AXIS MIB according to instructions in your NMS
software documentation.
The AXIS MIB The AXIS MIB contains a large number of objects which may be
categorized as follows:
• Menu objects - used for viewing and changing the AXIS
5470e/570/670e configuration from the NMS program. Refer to
Appendix Appendix A - The Parameter List, on page 285.
• Printer status and unit administration objects - used for
monitoring AXIS 5470e/570/670e print jobs and storing
parameter changes permanently.
• Trap objects - used for alarms at various error conditions.
For technical details, you can view the MIB file (axis.mib) with any
text editor.