User`s guide

AXIS 5470e/570/670e User’s Manual Section 11: Management & Configuration
191
Viewing
the Status file
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5470e/570/670e by typing:
telnet <host name> or telnet <IP address> in a DOS
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass.)
3. View the status file by typing:
status
Performing resets Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server’s parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5470e/570/670e by typing:
telnet <host name> or telnet <IP address> in a DOS
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass.)
3. Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with hardreset or default to
perform the other two reset operations.
Printing Hexdumps The AXIS 5470e/570/670e allows you to record a trace of the
communication between the AXIS 5470e/570/670e and the host.
The AXIS 5470e/570/670e supports hexdump printing for the SNA,
TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing
protocols. Please refer to Product Model Summary on page 10 for
details on the supported protocols.