User`s guide

AXIS 5470e/570/670e User’s Manual Section 11: Management & Configuration
173
Caution!
By clicking on the printer icons, a printer page opens, allowing you to
view the status and the supported capabilities of each the connected
printer. The extent of this information is depending on the printer
model. From the printer page, you can also print a test page to the
selected printer.
From the Print Jobs page you can view the status of the current print
jobs, including the number of printed bytes and the origin of the print
job. You can also view a log of the 20 latest print jobs that includes the
user, the printing protocol and the file size. A log that displays the
accumulated usage of the connected printer printers allows you to
control the usage of the connected printers. If you want to delete an
ongoing print job, a delete button is available on this page.
From the IBM sessions page you can view the list of configured IBM
sessions. You can choose to edit or delete a session from the list or add
a new session from the Add Session button.
The IBM Emulators page contains three Detailed View buttons.
• SCS/IPDS emulator configurations. Select the IBM printer that is
to be emulated from the drop-down list.
• SCS/3270DS emulator configurations
Common emulator settings: page format, CPI mapping, job
control, 3270 options, extended emulation, user driver.
• IPDS emulator configurations
IPDS Emulator Settings: IPDS configuration, IPDS PostScript
Driver settings, IPDS PCL Driver settings
From the Network Settings page you can set all parameters that
control the network traffic to and from the AXIS 5470e/570/670e.
You can enable or disable any of the supported network protocols and
fine-tune the parameter settings.
Any network configuration should involve the Network Administrator.