User`s guide

AXIS 5470e/570/670e User’s Manual Section 10: Setting Up - UNIX
163
Section 10 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 32, you are now able to print in
interactive mode using LPR, FTP or Reverse Telnet protocols.
However, if you want to integrate the AXIS 5470e/570/670e into
your host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 5470e/570/670e
and can be downloaded to your host using FTP, so no disks are
required. The axinstall script can also be downloaded from the Axis
WWW home page at http://www.axis.com/ and it is available on the
AXIS Product CD.
Having completed this operation, the printer connected to the AXIS
5470e/570/670e will appear as though they are directly connected to
the host printer spooler.
If you intend to operate your AXIS 5470e/570/670e in a
multiprotocol environment, you should also proceed according to one
or more of the following sections, as appropriate to your network.
Section 6 Setting Up - NetWare, on page 110
Section 7 Setting Up - Windows, on page 125
Section 8 Setting Up - OS/2, on page 151
Section 9 Setting Up - Macintosh, on page 157
Section 12 IPP (Internet Printing Protocol), on page 203