User`s guide

Section 9: Setting Up - Macintosh AXIS 5400 User’s Manual
162
6. Write a text file containing the parameters you want to set:
Parameters that you do not want to set should be excluded from
the text file.
Refer to Appendix A - The Parameter List, on page 285, for
information about which values that are valid for each parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for
printing documents.
9. Close the Chooser.
Note:
BINARY_TYPE_1. :BCP
INT_ADDR. :192.168.3.191
ATYPE_1. :EPSONLQ2
The _CFG port disappears 60 minutes after the AXIS 5470e/570 has been
powered on. If you want it to reappear, you must restart your AXIS 5470e/570.