User`s guide

AXIS 5400 User’s Manual Section 9: Setting Up - Macintosh
157
Section 9 Setting Up - Macintosh
Having connected the AXIS 5470e/570 to your network, this section
now describes how to set up your AXIS 5470e/570 for printing in
Macintosh environments using AppleTalk.
Note:
If you intend to operate your AXIS 5470e/570 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 6 Setting Up - NetWare, on page 110
Section 7 Setting Up - Windows, on page 125
Section 8 Setting Up - OS/2, on page 151
Section 10 Setting Up - UNIX, on page 163
Section 12 IPP (Internet Printing Protocol), on page 203
Installation Using the Chooser Window
Basic Configuration Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 5470e/570 or any of
default parameters by editing the config file. To access the config file
from a Macintosh, you can use:
• any Java enabled Web browser
• FTP using MacTCP, Fetch or Anarchie
In order to use any of the methods, you must assign an IP address to
the AXIS 5470e/570 as described in Setting Parameters, on page 161.
The AXIS 670e does not support the Apple Token Talk environment.