User`s guide

AXIS 5470e/570/650e User’s Manual Section 8: Setting Up - OS/2
151
Section 8 Setting Up - OS/2
Having connected the AXIS 5470e/570/650e to your network, as
described in Connecting a printer to the Ethernet Network, on page
26, this section now describes how to set up your AXIS
5470e/570/650e for printing in the OS/2 environment.
Continue with the instructions presented in the table below:
If you intend to operate your AXIS 5470e/570/650e in a
multiprotocol environment, you should also proceed to the other
relevant sections in this manual, namely:
Section 6 Setting Up - NetWare, on page 110
Section 7 Setting Up - Windows, on page 125
Section 9 Setting Up - Macintosh, on page 157
Section 10 Setting Up - UNIX, on page 163
Section 12 IPP (Internet Printing Protocol), on page 203
Printing
protocol
See ...
TCP/IP TCP/IP Printing, on page 152
NetBIOS/NetBEUI NetBIOS/NetBEUI Printing, on page 153