User`s guide

AXIS 5470e/570/670e User’s Manual Section 7: Setting Up - Windows
149
Client-Server Printing:
Client Setup
Follow these steps to use your AXIS 5470e/570/670e for client-server
printing at a Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
3. Select Network... in the Device Name list, select a local port
(LPT1 - LPT3) to redirect to your network printer.
4. In the Show Shared Printers on list, select the server from Server
Setup above.
5. In the Shared Printers list, select the printer you want to use.
6. Click OK, OK and Close.
7. Exit the Control Panel.
The client setup is completed and you can now print through your
AXIS 5470e/570/670e.
Note:
Windows Clients using LANtastic
From any Windows client, the AXIS 5470e/570/670e can also be used
for network printing in LANtastic environments.
You can share the printer drivers you have installed with other AXIS Print System
users on your network. In AXIS Print System, check the Enable Driver Sharing box
in My Printers | Settings | Program Options | General.