User`s guide

AXIS 5470e/570/670e User’s Manual Section 7: Setting Up - Windows
141
13. Select whether you want to share the printer with other network
users. Click OK.
The printer properties are displayed in an appropriate dialog that
allows you to refine your printer setup.
The Axis printer is now installed and will appear as an icon in the
Print Manager.
Note:
Installing
NetBIOS/NetBEUI
Printers in
Windows NT 3.5x:
Install the AXIS Print Monitor software on your Windows NT3.5x
client, if you have not already done so. AXIS Print Monitor can be
downloaded from the AXIS Online CD or from the Axis WWW
home page at http://www.axis.com/.
Follow the procedure below to install Axis printer ports from a
Windows NT 3.5x workstation:
1. Open the Print Manager and select Create Printer from the
Printer menu.
2. Enter an appropriate name in the Printer Name field.
3. Choose an appropriate printer driver for your printer from the
Manufacturers and Printer Models list displayed and then proceed
directly to step 6. Please note that it is only necessary to perform
steps 4 - 5 if your printer does not appear in the model list.
Note:
4. Select Other... in the driver list. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click OK.
5. Select the printer driver you want to install.
You can share the printer drivers you have installed with other AXIS Print System
users on your network. In AXIS Print System, check the Enable Driver Sharing box
in My Printers | Settings | Program Options | General
Even if the desired printer is available in the Manufacturer and Printer Models list,
you are advised to use the printer driver provided with your printer. This assures
you of the latest driver software.