User`s guide

AXIS 5470e/570/670e User’s Manual Section 7: Setting Up - Windows
135
Installing TCP/IP
Printer Ports
Follow the instructions below to install an AXIS Raw TCP/IP printer
port, using AXIS Print System:
1. Start AXIS Print System by selecting AXIS Print System from the
Start menu.
2. AXIS Print System starts. Select your desired printer from the
Available Networks Printers window and click the Add to My
Printers button. The Add Axis Printers Wizard starts.
3. AXIS Print System searches your computer and the network for a
suitable printer driver for the printer connected to the AXIS
5470e/570/670e. Click Next> if a printer driver is found. If not,
you have to manually find a printer driver using the More button
before clicking the Next> button.
4. Enter a name for the printer, select if you want to make it your
default printer and select if you want to produce a test page. Click
Finish.
The printer is now installed on your computer. The printer will
feature in the My Printers window of AXIS Print System as well as in
the Printers folder of the Windows operating system.
If you want to change the default name or the password of the AXIS
5470e/570/670e, use the Configuration Wizard that is available from
the User mode of the Web interface. Refer to Using a Web browser,
on page 170.
In Windows 2000, you can add a printer to the Active Directory.
When choosing Add (Custom) to My Printers in the Add Axis
Printers Wizard of AXIS Print System, you are given the possibility
to add a printer to the Active Directory.
Note:
If you want to install LPR printer ports instead of Raw TCP/IP printer ports, start
the Microsoft Add Printer Wizard and refer to the AXIS Print Monitor on-line help
for instructions.