User`s guide

Section 7: Setting Up - Windows AXIS 5470e/570/670e User’s Manual
134
4. AXIS IP Installer opens. Click the serial number of the AXIS
5470e/570/670e that appears in the server list. Restart the AXIS
5470e/570/670e if it does not appear in the list.
Notes:
5. Enter the desired IP address in the appropriate fields and click the
Set IP address button.
6. The AXIS IP Installer closes and the Installation Wizard starts.
Select the printer you want to install from the list and click
Next>.
7. AXIS Print System searches your computer and the network for a
location for a suitable printer driver for the printer. Click Next> if
a printer driver is found. If not, you have to manually find a
printer driver using the More button before clicking the Next>
button.
8. Enter a name for the printer, select if you want to make it your
default printer and select if you want to produce a test page. Click
Finish.
The printer is now installed on your computer. The printer will
feature in the My Printers window of AXIS Print System as well as in
the Printers folder of the Windows operating system.
If you want to change the default name or the password of the AXIS
5470e/570/670e, use the Configuration Wizard that is available from
the User mode of the Web interface. Refer to Using a Web browser,
on page 170.
Note:
• The serial number is located on the underside label of the AXIS
5470e/570/670e.
• If you have an active DHCP server in your network, you should not use AXIS
IP Installer to set the IP address. Follow the installation instructions available in
Installing TCP/IP Printer Ports, on page 135.
If you want to install LPR printer ports instead of Raw TCP/IP printer ports, start
the Microsoft Add Printer Wizard and refer to the AXIS Print Monitor on-line help
for instructions.