User`s guide

AXIS 5470e/570/670e User’s Manual Section 7: Setting Up - Windows
133
Windows NT4.0 and Windows 2000
Installing TCP/IP
Printers in Windows
NT 4.0/2000
Install AXIS Print System software on your Windows NT 4.0 or
Windows 2000 workstation, if you have not already done so. AXIS
Print System can be downloaded from the AXIS Online CD or from
the Axis WWW home page at http://www.axis.com/.
To enable printing in the TCP/IP environment, you must ensure that
the TCP/IP protocol is enabled on your client.
Note:
The set of instructions you should use to install TCP/IP printer ports
is dictated by the IP address of your AXIS 5470e/570/670e:
• If you have an active DHCP server on the network or if you have
already set the IP address of the AXIS 5470e/570/670e using
another method, you should follow the installation instructions
presented in Installing TCP/IP Printer Ports, on page 135.
• If your AXIS 5470e/570/670e is not assigned with a valid IP
address, you should follow the installation instructions presented
in Installing TCP/IP Printer Ports and Setting the IP Address,
on page 133.
Installing TCP/IP
Printer Ports and
Setting the IP Address
Follow the instructions below to install an AXIS Raw TCP/IP printer
port and set the IP address of the AXIS 5470e/570/670e, using AXIS
Print System:
1. Start AXIS Print System by selecting AXIS Print System from the
Start menu.
2. AXIS Print System starts. Select Search | Newly Connected Print
Server...
3. Read the instructions and click Next>.
In Windows NT and Windows 2000, the user needs sufficient access rights on the
domain server in order to manage printers on local computers via Axis Print
System.