User`s guide

Section 7: Setting Up - Windows AXIS 5470e/570/670e User’s Manual
128
Installing TCP/IP
Printer Ports and
Setting the IP Address
Follow the instructions below to install an AXIS Raw TCP/IP printer
port and set the IP address of the AXIS 5470e/570/670e, using AXIS
Print System:
1. Start AXIS Print System by selecting AXIS Print System from
Start | Programs.
2. AXIS Print System starts. Select Search | Newly Connected Print
Servers...
3. Read the instructions and click Next>.
4. AXIS IP Installer opens. Click the serial number of the AXIS
5470e/570/670e that appears in the server list. Restart the AXIS
5470e/570/670e if it does not appear in the list.
Notes:
5. Enter the desired IP address in the appropriate fields and click the
Set IP address button.
6. The AXIS IP Installer closes and the Installation Wizard starts.
Select the printer you want to install from the list and click
Next>.
7. AXIS Print System searches your computer and the network for a
location for a suitable printer driver for the printer. Click Next> if
a printer driver is found. If not, you have to manually find a
printer driver using the More button before clicking the Next>
button.
• The serial number is also located on the underside label of the AXIS
5470e/570/670e.
• If you have an active DHCP server in your network, you should not use AXIS
IP Installer to set the IP address. You should instead follow the installation
instructions available in Installing TCP/IP Printer Ports, on page 129.