User`s guide

Section 6: Setting Up - NetWare AXIS 5470e/570/670e User’s Manual
120
9. Select an appropriate NetWare Print Server name, that will be
associated with the AXIS 5470e/570/670e print server, by using
the Browse... button.
Notes:
10. If you want to define a remote printer number slot manually,
check the Manual box and type the desired number in the box.
11. Click the OK button to return to the Network Environments
window.
Basic Queue-based printing (Pure IP)
Axis print servers with software version 6.0 or later allow users to print
in a Pure IP environment using traditional queue-based printing
(which usually uses the IPX transport protocol). If you prefer using
NDPS as your printing method, please refer to Setup using NDPS, on
page 111.
In the NetWare Pure IP environment, you must use NetWare
Administrator to create the printer, print server and queue objects.
Installing the
AXIS 5470e/570/670e
Follow the instructions below to install the AXIS 5470e/570/670e in
the NetWare Pure IP environment:
1. Start the Configuration Wizard for general setup from the User
mode in the AXIS 5470e/570/670e Web interface.
2. Click your way through the Wizard until you reach the NetWare
page.
• You cannot type or edit the name manually.
• Make sure that you have PSERVER.NLM running if you selected Remote
Printer Mode in step 8.