User`s guide

AXIS 5470e/570/670e User’s Manual Section 6: Setting Up - NetWare
115
The AXIS NetPilot Installation Wizard will guide you through the
installation process. The following options are available:
Note:
Print Server Name The default print server name consists of the characters ‘AXIS’
followed by the last six digits of the serial number. If you want to
change the print server name, just type the new name in the available
text field.
Environments Choose which networking environments you want to configure the
AXIS 5470e/570/670e for, i.e. SNA, NetWare, TCP/IP, Windows &
OS/2 or AppleTalk. If your network comprises various different
platforms, you can enable any combination of environments.
Note:
SNA Select the emulation mode for the AXIS 5470e/570/670e. The
supported modes are 3174 (Mainframe) and 5494 (AS/400). You
should also provide the valid emulation settings.
NetWare NDS Place NetWare Print Queues on a specific bindery server, or
alternatively into an NDS Tree.
The IP address Choose the method the AXIS 5470e/570/670e should employ for
obtaining an IP address. DHCP, ARP, RARP and BOOTP are
supported. You can also set the IP address manually. Refer to
Assigning an IP address, on page 32 for further information about
setting the IP address.
The number of options varies according to the number of environments you
enable.
AppleTalk is only available for the AXIS 5470e/570.