User`s guide

Section 6: Setting Up - NetWare AXIS 5470e/570/670e User’s Manual
112
Public Access To create a public access printer using the NDPS Manager object in
your NetWare administrator, do the following:
1. Double-click on the NDPS Manager object you will be using to
control the Printer Agents.
2. At the Identification page for the NDPS Manager, click the
printer Agent List button. The Printer Agent List dialog will
appear.
3. Click New. The Create Printer Agent dialog will appear.
4. Type a name of your choice in the NDPS Printer Agent field.
5. Choose the Axis Gateway configuration in the Gateway Type
window. Select TCP/IP or IPX as transport protocol (See Notes
below).
6. Click OK.
7. Once you have completed the required tasks, you are ready to
print in your NDPS environment.
Notes:
Controlled Access 1. Make sure that the NDPS Gateway is not configured to
automatically create a public access printer, before you connect
the AXIS 5470e/570/670e to the network.
2. Connect the AXIS 5470e/570/670e to the NetWare network.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the NDS Tree.
4. Create a new Printer Agent (PA) or convert a Public Access
Printer to a Controlled one.
• The Public Access print servers are immediately available for everyone on the
network.
• The Axis Gateway will appear in NetWare 5.1 and later releases. To use the
Axis Gateway with earlier versions of NetWare, you can download the Axis
Gateway Configuration utility from www.axis.com.
• To print using TCP/IP, Axis print server firmware 6.1 or later is required. In
order to print using IPX/SPX, Axis print server firmware 5.51 or later is
needed.