User`s guide

AXIS 5470e/570/670e User’s Manual Section 6: Setting Up - NetWare
111
Setup using NDPS
The AXIS 5470e/570/670e supports Novell Distributed Print Services
(NDPS), which is Novell’s new generation architecture for printing
and printer administration. You can run NDPS over Pure IP
(TCP/IP) or IPX/SPX.
Before the AXIS 5470e/570/670e can be installed, make sure that
NDPS is installed and a Broker is loaded on your NetWare file server.
AXIS 5470e/570/670e uses the AXIS NDPS Gateway for printing in
networks using either IP or IPX as transport protocols. The printer
gateways are included with the NDPS software and are automatically
installed together with NDPS.
Notes:
Installing the AXIS 5470e/570/670e in NDPS environments
Having assigned an IP address to the AXIS 5470e/570/670e as
described in Assigning an IP address, on page 32, you are now ready
to install the AXIS 5470e/570/670e for NDPS printing. You can
select to install the connected printers as public or controlled access
printers. Follow the instructions below to install the AXIS
5470e/570/670e using NDPS:
Notes:
• NDPS requires that you are running NetWare 4.11 or higher.
• Pure IP is only supported by NetWare 5 or higher.
• The HP-JETADMIN parameter of the AXIS 5470e/570/670e must be set to
YES in order for the communication between the AXIS 5470e/570/670e and
the NDPS gateway to be enabled.
• If you do not have an NDPS Manager object available, start out with creating
one in the NetWare Administrator.
• If the PSERVER_NDS parameter includes the name of a tree and not a
specific file server, RCONAG6.NLM must be running on at least one file
server in the specified tree.