User`s guide

Section 6: Setting Up - NetWare AXIS 5470e/570/670e User’s Manual
110
Section 6 Setting Up - NetWare
This section describes how to continue the installation of the AXIS
5470e/570/670e in the NetWare environment. Identify which
transport protocol you are running on your network and which
installation method you should use. Continue the installation by
selecting the appropriate installation instructions from the table
below:
If you intend to operate your AXIS 5470e/570/670e in a multi-
protocol, mixed environment, you should also proceed to the other
relevant sections in this manual, namely:
Section 7 Setting Up - Windows, on page 125
Section 8 Setting Up - OS/2, on page 151
Section 9 Setting Up - Macintosh, on page 157
Section 10 Setting Up - UNIX, on page 163
Section 12 IPP (Internet Printing Protocol), on page 203
Installation
method
Tr a ns p or t
protocol
Action
NDPS TCP/IP
IPX/SPX
See Setup using NDPS, on page 111
Proceed with Installing the AXIS 5470e/570/670e in NDPS environments, on
page 111.
Queue based
printing
IPX/SPX See Basic Setup with AXIS NetPilot, on page 114
IPX/SPX
Advanced
configuration
If you need a more advanced installation that is not covered by the AXIS NetPilot
Installation Wizard, continue with Advanced Installation using AXIS NetPilot,
on page 117.
Pure IP
See Basic Queue-based printing (Pure IP), on page 120