User`s manual

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual
96
If you want to print both 240-pel and 300-pel AFP/IPDS jobs, create
two separate FSAs, one for jobs with resolution of 120 or 240, and
one for jobs with resolution of 300 pels. The 240-pel resolution FSA
uses 240-pel resources, and the 300-pel resolution FSA uses 300-pel
resources. Both FSAs are defined to drive the same printer; however,
only one FSA can be active at one time for a given printer. You should
define separate classes or destinations for each FSA. Your
installation must route the appropriate jobs to the appropriate class
or destination. The two FSAs can be defined in the same or in
separate startup procedures.
//APSWPROT PROC
//********************* THE PSF TCP/IP WRITER PROCEDURE **********************
//*
//*01* MODULE-NAME = APSWPROT
//* $MOD(APSWPROT) COMP(APS) PROD(PSF) : RELEASE 2.2.0
//*
//*01* DESCRIPTIVE-NAME = START PROCEDURE FOR PSF:
//*
//* TCP/IP ATTACHED DEVICES
//*
//*01* STATUS = VERSION 2, RELEASE 2, LEVEL 0
//*
//*01* FUNCTION = THIS PROCEDURE IS COPIED FROM THE
//* DISTRIBUTION LIBRARY TO SYS1.PROCLIB.
//* THIS COPY IS PERFORMED BY MACRO ‘SGAPS5PR’.
//*
//*01* NOTES = THE FULL NAME OF THE DEFAULT PAGEDEF IS
//* P1A06462.
//* THE FULL NAME OF THE DEFAULT FORMDEF IS
//* F1A10110.
//* THE FULL NAMES OF THE DEFAULT FONTS ARE
//* X0GF10, X0GS10, X0TU10, AND X0GU10
//* THE FULL NAME OF THE SEPARATOR PAGE PAGEDEF IS
//* P1V06483
//* THE FULL NAME OF THE SEPARATOR PAGE FONT IS
//* X0GT15
//*