User`s manual

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual

Device Statement Explanation

JUNIT

Specifies:

1. The device address (host-connected, channel-attached, non-SNA printers only). Do not specify a device

address for the AXIS 5570e/AXIS 5670e when using TCP/IP attachment.

2. The name of the processor to which the device is attached

3. A destination class for messages about the device

4 .Whether the device is initially online or offline

This parameter is required.

MODE

Specifies that the printer is managed by an FSS. This parameter is required.

Specifies which data-set processing mode is supported. For the AXIS 5570e/AXIS 5670e attached to Postscript

printers, the correct setting is

PRMODE=(LINE,PAGE,), indicating that composed-page and line

data sets can be printed.

Specifies the print output class that the printer is to process. You may want to consider handling disabled

mechanisms by defining print classes.