User`s manual

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual

Configuring the

AXIS 5570e/AXIS

5670e

Follow the instructions below to configure your AXIS 5570e/AXIS

5670e using a standard Web browser:

1. Start a Web browser, e.g. Internet Explorer or Netscape

Navigator.

2. Enter the IP address or the host name of the AXIS 5570e/AXIS

5670e in the location field and press the Enter key on your

keyboard. The internal Web pages of the AXIS 5570e/AXIS 5670e

will appear.

Note:

Note for IPDS printing:

3. Click the Configuration Wizard for IBM sessions button.

4. Click the Add Session button. This will start the Configuration

Wizard which is a step-by-step guide through the required IBM

configuration settings.

To protect the Admin pages and the Configuration Wizard from unauthorized

use, enter a password (default Pass) in the Root Password field under Admin |

General Settings.

In the Configuration Wizard, you can choose between PCL or PostScript printing.

Choose the printer language that corresponds to your printer.