User`s manual

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual
78
21. Set Default LU type to Printer (LU type 1 or 3).
22. Specify the VTAM LU name prefix. Click OK.
Notes:
You can now generate a configuration report from NW for SAA. To do
this, simply mark the server icon in the left window and select
Generate Server Configuration Report from the
function menu.
The following table is a summary of a report generated by this
command for the example above.
• When the LUs are created the default names for the Printer Devices will be
<name prefix> followed by a two digit number starting at the number you
entered in the starting dependent LU number field.
• In the example below, eight LUs are created automatically. The LU names
created will be BRLTST04 through to BRLTST0B. These names must
correspond to the Printer Names you specify for the TN3270E sessions in
the Print Server.
Profile Name NWSAA
SNA Network ID: SEEDB
Peripheral node control point name: CPNAME
Block ID/PU ID: 05D 66204
Local/Partner SAP for ILUs: 04
Logical Adapter: E100B_1
PU Profile: NWSAAPU
Adapter Name E100B_1
Adapter Type: LLC 802.2
Terminate peer link if no active APPC sessions: No
Logical adapter number: 0