User`s manual

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual

2. Add the Print Server PU and LU definitions to the major node

definition.

Note:

3. Make sure that the corresponding VTAM Logon-mode entries

are available and that the appropriate LU session types (LU1 or

LU3) are used.

4. Vary ACTive the VTAM Major Node definition for the

AXIS 5570e/AXIS 5670e.

Sample Sessions The examples below are based on samples given in VTAM

Customization (IBM part no: SC23-0112), with some changes to

optimize use for AXIS 5570e/AXIS 5670e.

VTAM for MVS is assumed, although the configuration for VM and

VSE is similar.

For Switched Major Node definitions you need to:

• Add the IDBLK (default = E07) and IDNUM (default = last 5

digits of the AXIS 5570e/AXIS 5670e MAC address) entries to

the PU definition.

• Code a PATH definition using the unit’s full 12 digit MAC

address.

Example: AnAXIS 5570e/AXIS 5670e with a MAC/node address

of 00408C100086 will be defined as:

PA5570e1 PATH DIALNO=010400408C100086,

GID=1, FID=1, GRPNM=gggggg

‘GRPNM’ specifies the symbolic name of a GROUP statement in an NCP major

node. That GROUP statement defines a logical group of SDLC switched lines or

token-ring switched lines.