User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 4: Setting Up - AS/400 (iSeries)
53
Creating a Printer
Device Description
Create a printer device description by following the instructions
below:
1. Issue the command CRTDEVPRT and press Enter.
2. Press F11 to display keywords.
3. Select a name for the printer device and enter it at the
Device
Description (DEVD)
line. The name may comprise the letters
A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed. In the following
instructions the printer device name will be referred to as
AXISPR1.
4. Enter
*LAN at the Device class (DEVCLS) line.
5. Enter
*IPDS at the Device type (TYPE) line.
6. Enter
0 at the Device model (MODEL) line.
7. Enter
*IP at the LAN attachment (LANATTACH) line.
8. Enter a port number at the
Port number (PORT) line. The Axis
print server is pre-configured with the port numbers 5001, 5002
and 5003 for IPDS printing.
9. Enter a FGID number at the
Font Identifier (FONT) line, e.g.
11 (Courier).
10. Define the
Remote location (RMTLOCNAME). Use the IP address
of the AXIS 5470e/670e.
11. (Optional) Enter the name of the previously created PSF
configuration at the
User-defined object (USRDFNOBJ):
Object
line.
12. (Optional) Enter the library of the previously created PSF
configuration at the
User-defined object (USRDFNOBJ):
Library line.
13. (Optional) Enter
*PSFCFG at the User-defined object
(USRDFNOBJ): Object type line.
14. Press the Enter key on your keyboard to create the printer device
description.