User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 4: Setting Up - AS/400 (iSeries)

PPR/PPD Printing - IPDS data streams

Note:

The configuration procedures presented in this section are divided

into three separate steps:

• Configuring the AS/400 host

• Configuring the AXIS 5570e/AXIS 5670e

• Verifying the communication between the AXIS 5570e/AXIS

5670e and the AS/400

Before you begin Make sure that the AS/400 host is running OS/400 V3R6 or higher

with TCP/IP support installed and configured.

Make sure that the latest PTFs are installed. Information about which

PTFs to use can be obtained from:

Configuring the

AS/400 Host System

When configuring the AS/400 host system you can:

• create a PSF configuration

• create a printer device description

Creating a PSF

Configuration

The system uses default values but you can optionally create a PSF

configuration by following the instructions below:

1. Issue the command CRTPSFCFG.

2. Press F11 to display keywords.

IPDS is only available for AXIS 5570e/AXIS 5670e models with the IPDS option

installed. For more information, refer to Product Model Summary, on page 9.

http://as400service.rochester.ibm.com/