User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 4: Setting Up - AS/400 (iSeries)

Verifying the

Communication Link

1. Type WRKCFGSTS *CTL xxxx* on the AS/400 command line

(xxxx is the first four characters of the AXIS 5570e/AXIS 5670e

5494 LU Name)and press Enter. After a couple of minutes,

ensure that the following items are displayed:

• One APPC controller with the same name as the AXIS

5570e/AXIS 5670e 5494 LU Name.

• One APPC device with the same name as the AXIS

5570e/AXIS 5670e 5494 LU Name, one controller

session (QRMTWSC) and the currently active printer

sessions (QRMTWSC).

• One twinax controller named xxxxxRMT, where xxxxx

are the first five characters of the AXIS 5570e/AXIS 5670e

5494 LU Name.

• One, two or three twinax printer device named

xxxxPRT0z (xxxx are the first four characters of the

AXIS 5570e/AXIS 5670e 5494 LU Name and z is the

printer device number).

The status of all items should now be ACTIVE or VARIED

ON.

2. Type STRPRTWTR xxxxPRT0z on the AS/400 command line

(xxxxPRT0z is the printer device name) and press Enter. This

command starts the writer for this printer device.

3. Press the AXIS 5570e/AXIS 5670e test button once to print a test

page. Ensure that the SNA status is defined on the test page as

Idle, Actv or LU-4.