Manualshelf

User`s manual

ManualsBrandsAxis ManualsComputer equipment5670e
41424344454647484950
Section 4: Setting Up - AS/400 (iSeries) AXIS 5570e/AXIS 5670e User’s Manual
44
Use the command WRKCFGSTS *CTL xxxx* (where xxxx is the
first 4 characters of the AXIS 5570e/AXIS 5670e 5494 LU
Name)and press Enter to delete any previously created Controller
and Device descriptions specific to your AXIS 5570e/AXIS 5670e.
Delete the Device Descriptions (indented text) first and then the
Controllers. Print a test page if you are unsure of the AXIS
5570e/AXIS 5670e 5494 LU Name.
Work with Configuration Status S1032BB0
Position to . . . . . Starting characters
Type options, press Enter.
1=Vary on 2=Vary off 5=Work with job 8=Work with description
9=Display mode status 13=Work with APPN status...
Opt Description Status -------------Job--------------
FSIOP ACTIVE
ETHERNET ACTIVE
AXIS11 ACTIVE
AXIS11 ACTIVE
AXIS11 ACTIVE/TARGET SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190
AXIS11 ACTIVE/SOURCE SHEILA QUSER 010190