User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual

Managing DHCP Follow the instructions below to download the IP address using

DHCP:

1. Edit or create a scope in the DHCP manager of the DHCP

daemon. The entries included in this scope should contain the

following parameters:

• range of IP addresses

•subnet mask

• default router IP address

• WINS server IP address(es)

• lease duration

2. Activate the scope.

The AXIS 5570e/AXIS 5670e will automatically download the DHCP

parameters.

If you are using WINS, you must include at least one WINS server IP

address in the DHCP scope. Immediately after the IP address has been

received, the AXIS 5570e/AXIS 5670e registers its host name and IP

address on the WINS server.

The AXIS 5570e/AXIS 5670e can automatically download a

customized config file from a TFTP server. Just add the name of the

config file and the TFTP server’s IP address to your DHCP scope. The

config file is downloaded immediately after the AXIS 5570e/AXIS

5670e receives its IP address.

System privileges You need root privileges on your UNIX system, or administrator

privileges on a Windows NT server.

Ethernet address You need to know the Ethernet address of your AXIS 5570e/AXIS

5670eto perform the installation. The Ethernet address is based upon

the serial number of your print server.

This means, for example, that a print server with the serial number

00408C100086, will have the corresponding Ethernet address of 00

40 8C 10 00 86. The serial number is located on the backside label of

the print server.